United StatesChange

C-Clamp for Strut and Rod


  • Dual puropse beam clamp for rod and strut
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 23)


Material: Steel
Finish: Pregalvanized
Part Number Rod SizeRS Flange ThicknessFT B Screw DiameterSc Screw LengthL Pipe Size TorqueTQ Static LoadF Certifications
200RS375 3/8" 5/8" Max 1 1/2" 3/8" 3" 3 1/2" Max 5 ft lb 250 lb cULus
200RS500 1/2" 5/8" Max 1 1/2" 1/2" 3" 8" Max 11 ft lb 360 lb
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Load rating is per fastener with a 3X safety factor. Actual installation must be evaluated to determine load on the individual fastener.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.