United StatesChange
CADDY

300 Universal Beam Clamp

Features

  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19 and 23)

Specifications

Material: Steel
Finish: Plain
Part Number Rod SizeRS Flange ThicknessFT A TorqueTQ Static Load 1F1 Static Load 2F2 Certifications Standard Packaging Quantity
3000037PL 3/8" 13/16" Max 1 1/8" 5 ft lb 500 lb 250 lb cULus, FM 100 pc
3000050PL 1/2" 13/16" Max 1 1/8" 8 ft lb 950 lb 760 lb cULus, FM 50 pc
3000062PL 5/8" 13/16" Max 1 1/8" 5 ft lb 950 lb 760 lb cULus 50 pc
3000075PL 3/4" 13/16" Max 1 1/8" 5 ft lb 950 lb 760 lb cULus 50 pc
3000087PL 7/8" 13/16" Max 1 1/8" 5 ft lb 950 lb 760 lb cULus 50 pc
Finish: Electrogalvanized
Part Number Rod SizeRS Flange ThicknessFT A TorqueTQ Static Load 1F1 Static Load 2F2 Certifications Standard Packaging Quantity
3000037EG 3/8" 13/16" Max 1 1/8" 5 ft lb 500 lb 250 lb cULus, FM 100 pc
3000050EG 1/2" 13/16" Max 1 1/8" 8 ft lb 950 lb 760 lb cULus, FM 50 pc
3000062EG 5/8" 13/16" Max 1 1/8" 5 ft lb 950 lb 760 lb cULus 50 pc
3000075EG 3/4" 13/16" Max 1 1/8" 5 ft lb 950 lb 760 lb cULus 50 pc
3000087EG 7/8" 13/16" Max 1 1/8" 5 ft lb 950 lb 760 lb cULus 50 pc
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications