United StatesChange

305 Stainless Steel Beam Clamp, Top Mount


  • Pressed steel beam clamp
  • Structural attachment to top flange of metal beams, purlins, channel, or angle iron
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19)


Material: Stainless Steel 304 (EN 1.4301)
Part Number Rod SizeRS Flange ThicknessFT A Screw DiameterSc Screw LengthL TorqueTQ Static LoadF
3050037S4 3/8" 5/8" Max 7/8" 3/8" 1 1/2" 5 ft lb 500 lb
3050050S4 1/2" 5/8" Max 7/8" 3/8" 1 1/2" 5 ft lb 1,130 lb
Set screw must be tightened and torqued onto the sloped side of the I-beam, channel, or angle iron flange.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.