United StatesChange
CADDY

310 Universal Beam Clamp, Thick Flange

Features

  • Universal beam clamp for thick beams
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19 and 23)

Specifications

Material: Steel
Finish: Plain
Part Number Rod SizeRS Flange ThicknessFT A TorqueTQ Static Load 1F1 Static Load 2F2 Standard Packaging Quantity
3100037PL 3/8" 1 1/4" Max 1" 5 ft lb 500 lb 250 lb 50 pc
3100050PL 1/2" 1 1/4" Max 1" 11 ft lb 950 lb 760 lb 50 pc
Finish: Electrogalvanized
Part Number Rod SizeRS Flange ThicknessFT A TorqueTQ Static Load 1F1 Static Load 2F2 Standard Packaging Quantity
3100037EG 3/8" 1 1/4" Max 1" 5 ft lb 500 lb 250 lb 50 pc
3100050EG 1/2" 1 1/4" Max 1" 11 ft lb 950 lb 760 lb 50 pc
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.