United StatesChange
CADDY

605 Two-Rod Roller Hanger

Features

  • Suspends pipe from two rods where longitudinal movement in pipe may occur due to expansion or contraction
  • Conforms with Federal Specification WW-H-171 (Type 42), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 41)

Specifications

Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Part Number Pipe Size Rod SizeRS A B C Static LoadF
6050250HD 2 1/2" 1/2" 3 1/4" 4 7/8" 1 13/16" 660 lb
6050300HD 3" 1/2" 3 9/16" 5 5/8" 1 13/16" 700 lb
6050350HD 3 1/2" 1/2" 3 7/8" 6 1/8" 1 13/16" 750 lb
6050400HD 4" 5/8" 4 3/8" 6 11/16" 2 1/4" 750 lb
6050500HD 5" 5/8" 5" 7 15/16" 2 1/4" 750 lb
6050600HD 6" 3/4" 5 13/16" 9 9/16" 2 5/8" 1,070 lb
6050800HD 8" 7/8" 7 3/16" 12" 3 1/16" 1,350 lb
6051000HD 10" 7/8" 8 7/16" 14" 3 1/16" 1,730 lb
6051200HD 12" 7/8" 9 5/8" 15 3/4" 3 3/16" 2,400 lb
6051400HD 14" 1" 10 7/8" 17 5/8" 3 1/2" 3,130 lb
6051600HD 16" 1" 12" 19 5/16" 3 9/16" 3,970 lb
6051800HD 18" 1" 13 1/16" 21 5/8" 3 9/16" 4,200 lb
6052000HD 20" 1 1/4" 14 9/16" 24 1/8" 4 5/16" 4,550 lb
6052400HD 24" 1 1/2" 17 3/8" 28 3/8" 4 15/16" 6,160 lb
6053000HD 30" 1 1/2" 20 15/16" 35 3/8" 5 9/16" 7,290 lb
Roll and sockets are cast iron and axle is carbon steel.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.