United StatesChange
CADDY

615 Pipe Roller Chair

Features

  • Support pipe from a substructure or structural member where longitudinal movement may occur due to expansion or contraction
  • Conforms with Federal Specification WW-H-171 (Type 45), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 44)

Specifications

Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Part Number Pipe Size A B C D Screw DiameterSc Screw LengthL Static LoadF
6150250HD 2 1/2" 3 1/2" 1 1/4" 4" 1 7/8" 3/8" 1 1/4" 600 lb
6150300HD 3" 4" 2" 4 5/8" 2 1/4" 3/8" 1 1/4" 600 lb
6150350HD 3 1/2" 4 5/8" 2" 5 3/8" 2 5/8" 3/8" 1 1/4" 600 lb
6150400HD 4" 5 3/16" 2" 5 7/8" 2 7/8" 1/2" 1 1/2" 700 lb
6150500HD 5" 6" 3" 6 15/16" 3 1/2" 1/2" 1 1/2" 700 lb
6150600HD 6" 6 3/4" 3 1/8" 8" 4" 1/2" 1 1/2" 1,000 lb
6150800HD 8" 8 1/4" 3 3/8" 10" 5 1/4" 5/8" 1 3/4" 1,300 lb
6151000HD 10" 9 15/16" 5 1/4" 12 1/2" 6 5/16" 5/8" 1 3/4" 1,300 lb
6151200HD 12" 11 5/8" 5 1/2" 14" 7 1/2" 5/8" 1 3/4" 2,300 lb
6151400HD 14" 13" 5 3/4" 15 7/8" 8 3/8" 5/8" 1 3/4" 3,000 lb
6151600HD 16" 14 9/16" 8" 17 7/8" 9 7/16" 5/8" 2" 4,000 lb
6151800HD 18" 15 15/16" 9 1/2" 20" 10 7/16" 5/8" 2" 4,000 lb
6152000HD 20" 17 1/8" 10" 22" 11 1/2" 3/4" 2 1/4" 4,000 lb
6152400HD 24" 20 9/16" 12" 26 1/8" 13 15/16" 3/4" 2 1/4" 4,000 lb
Chair and axle are carbon steel and roll is cast iron.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.