United StatesChange
CADDY

619 Adjustable Pipe Roller with Steel Frame

Features

  • Support pipe from a substructure or structural member where longitudinal movement may occur due to expansion or contraction
  • Vertical adjustment is provided by adjusting bolts on each corner
  • Conforms with Federal Specification WW-H-171 (Type 47), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 46)

Specifications

Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Part Number Pipe Size Hole SizeHS A B C D E Static LoadF
6190350HD 2" – 3 1/2" 9/16" 5 1/16" 2 5/8" 5" 1 1/2" 1 3/8" 390 lb
6190600HD 4" – 6" 9/16" 6 3/4" 4" 6 1/4" 2 1/4" 1 3/8" 950 lb
6191000HD 8" – 10" 11/16" 10 11/16" 6 3/8" 8 3/4" 4" 2 1/2" 2,100 lb
6191400HD 12" – 14" 13/16" 12 15/16" 8 1/8" 11" 5 3/4" 2 7/8" 3,075 lb
6192000HD 16" – 20" 13/16" 16 11/16" 11 3/8" 12 1/4" 7" 3 1/8" 4,980 lb
6192400HD 22" – 24" 13/16" 18 13/16" 13 3/8" 13 1/4" 7 5/8" 3 1/8" 6,100 lb
6193000HD 26" – 30" 1 1/16" 23 1/16" 16 3/4" 16 3/4" 10" 3 7/8" 7,500 lb
Frame and axle are carbon steel and roll is cast iron.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.