United StatesChange
CADDY

520 CADDY EZ RISER, Epoxy Coated

Features

  • Recommended for suspending vertical steel pipe risers where it is undesirable to have the steel of the hanger in direct contact with the pipe
  • Conforms with Federal Specification WW-H-171 (Type 8), Manufacturers Standardization Society (MSS) SP-58 (Type 8)
  • Slotted holes make assembly easy, eliminating loose hardware
  • Bolts are accessible from the front, serrated washer head design means no wrench required on back side for tightening

Specifications

Material: Steel
Finish: Epoxy Powder Coated; Electrogalvanized
Part Number Pipe Size Outer DiameterOD Hole SizeHS LengthL A B Screw DiameterSc Screw LengthL Static LoadF
5200050EP 1/2" 0.840" 7/16" 1 1/4" 8 1/2" 1" 3/8" 1 1/4" 255 lb
5200075EP 3/4" 1.050" 7/16" 1 1/4" 9" 1" 3/8" 1 1/4" 255 lb
5200100EP 1" 1.315" 7/16" 1 1/4" 9" 1" 3/8" 1 1/4" 255 lb
5200125EP 1 1/4" 1.660" 7/16" 1 1/2" 9 7/16" 1" 3/8" 1 1/2" 255 lb
5200150EP 1 1/2" 1.900" 7/16" 1 1/2" 9 7/8" 1" 3/8" 1 1/2" 255 lb
5200200EP 2" 2.375" 7/16" 1 1/2" 10 1/4" 1 3/16" 3/8" 1 1/2" 255 lb
5200250EP 2 1/2" 2.875" 7/16" 1 1/2" 11" 1 3/16" 3/8" 1 1/2" 390 lb
5200300EP 3" 3.500" 7/16" 1 1/2" 11 3/4" 1 3/16" 3/8" 1 1/2" 530 lb
5200400EP 4" 4.500" 9/16" 2" 13" 1 1/2" 1/2" 2" 810 lb
5200500EP 5" 5.563" 9/16" 2" 14 1/2" 1 1/2" 1/2" 2" 1,160 lb
5200600EP 6" 6.625" 9/16" 2" 16" 2" 1/2" 2" 1,570 lb
Clamp is fitted for steel pipe and should be installed below a coupling or shear lug, with bolts torqued to recommended value.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.