United StatesChange
CADDY

320L Welded Beam Attachment

Features

  • Hanger rod attachment to be welded to the bottom of a beam where large rod sizes and substantial loads exist
  • Based on the allowable stresses shown in ANSIĀ® Code for Pressure Piping
  • Conforms with Federal Specification WW-H-171 (Type 22), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 22)

Specifications

Material: Steel
Finish: Plain
Part Number Rod SizeRS MRI A B Static LoadF
320L0037PL 3/8" 3/4" 2 5/8" 1 9/16" 600 lb
320L0050PL 1/2" 7/8" 2 5/8" 1 5/8" 1,130 lb
320L0062PL 5/8" 1" 2 13/16" 1 5/8" 1,810 lb
320L0075PL 3/4" 1 1/4" 2 3/4" 1 7/8" 2,710 lb
320L0087PL 7/8" 1 3/8" 3 7/8" 2" 3,770 lb
320L0100PL 1" 1 5/8" 4" 2" 4,960 lb
320L0125PL 1 1/4" 2" 4 3/8" 2 1/2" 8,000 lb
320L0150PL 1 1/2" 2 7/16" 5 3/4" 3" 11,630 lb
Install if rigid hanger rod and vertical adjustment are necessary.
1-1/4" and larger are fabricated.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.