United StatesChange
CADDY

325 Steel Side Beam Attachment

Features

  • Fastens to the wall or the side of a joist to support hanger rod
  • Conforms with Federal Specification WW-H-171 (Type 35), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 34)

Specifications

Material: Steel
Finish: Plain
Part Number Hole SizeHS HeightH LengthL WidthW ThicknessT Static Load 1F1 Static Load 2F2
3250037PL 7/16" 2" 2" 1.9" 5/32" 650 lb 1,150 lb
3250050PL 9/16" 2" 2" 1.9" 5/32" 650 lb 1,150 lb
3250062PL 11/16" 2 1/2" 2 1/2" 2.5" 1/4" 850 lb 2,000 lb
3250075PL 13/16" 3" 3" 3.0" 3/8" 900 lb 3,500 lb
3250087PL 15/16" 4" 4" 4.0" 3/8" 900 lb 3,600 lb
3250100PL 1 1/16" 4" 4" 4.0" 1" 900 lb 3,700 lb
Finish: Electrogalvanized
Part Number Hole SizeHS HeightH LengthL WidthW ThicknessT Static Load 1F1 Static Load 2F2
3250037EG 7/16" 2" 2" 1.9" 5/32" 650 lb 1,150 lb
3250050EG 9/16" 2" 2" 1.9" 5/32" 650 lb 1,150 lb
3250062EG 11/16" 2 1/2" 2 1/2" 2.5" 1/4" 850 lb 2,000 lb
3250075EG 13/16" 3" 3" 3.0" 3/8" 900 lb 3,500 lb
3250087EG 15/16" 4" 4" 4.0" 3/8" 900 lb 3,600 lb
3250100EG 1 1/16" 4" 4" 4.0" 1" 900 lb 3,700 lb
Refer to Static Load 1 when used with lag screw. Refer to Static Load 2 with bolt to steel.
Follow fastener manufacturer’s recommended shear and pull-out strength when fastening to the structure. Fastener not included.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.