United StatesChange
CADDY

C-Clamp

2000037PL

Features

  • Pressed steel beam clamp
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 23)

Specifications

Part Number 2000037PL
Material Steel
Finish Plain
Static Load Safety Factor 3.5:1
Rod Size (RS) 3/8"
Flange Thickness (FT) 3/4" Max
A 1 1/8"
Screw Diameter (Sc) 3/8"
Screw Length (L) 1 1/4"
Pipe Size 4" Max
Torque (TQ) 5 ft lb
Static Load (F) 250 lb
Standard Packaging Quantity 100 pc
UPC 78285636300
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.

Applications