United StatesChange
CADDY

C-Clamp for Strut and Rod

200RS375

Features

  • Dual puropse beam clamp for rod and strut
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 23)

Specifications

Part Number 200RS375
Material Steel
Finish Pregalvanized
Rod Size (RS) 3/8"
Flange Thickness (FT) 5/8" Max
B 1 1/2"
Screw Diameter (Sc) 3/8"
Screw Length (L) 3"
Pipe Size 3 1/2" Max
Torque (TQ) 5 ft lb
Static Load (F) 250 lb
Certifications cULus
Standard Packaging Quantity 10 pc
UPC 78285634245
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Load rating is per fastener with a 3X safety factor. Actual installation must be evaluated to determine load on the individual fastener.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications