United StatesChange
CADDY

305 Stainless Steel Beam Clamp, Top Mount

3050037S4

Features

  • Pressed steel beam clamp
  • Structural attachment to top flange of metal beams, purlins, channel, or angle iron
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19)

Specifications

Part Number 3050037S4
Material Stainless Steel 304 (EN 1.4301)
Rod Size (RS) 3/8"
Flange Thickness (FT) 5/8" Max
A 7/8"
Screw Diameter (Sc) 3/8"
Screw Length (L) 1 1/2"
Torque (TQ) 5 ft lb
Static Load (F) 500 lb
Standard Packaging Quantity 100 pc
UPC 78285659689
Set screw must be tightened and torqued onto the sloped side of the I-beam, channel, or angle iron flange.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.