United StatesChange
nVent CADDY

310 Universal Beam Clamp, Thick Flange

3100050EG

Features

  • Universal beam clamp for thick beams
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19 and 23)

Specifications

Part Number 3100050EG
Material Steel
Finish Electrogalvanized
Rod Size (RS) 1/2"
Flange Thickness (FT) 1 1/4" Max
A 1"
Torque (TQ) 11 ft lb
Static Load 1 (F1) 950 lb
Static Load 2 (F2) 760 lb
Certifications cULus
FM
Standard Packaging Quantity 50 pc
UPC 78285633991
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.