315 Malleable Iron Purlin Clamp

3150037PL

Details
Applications
Video
Documents
3D Models

PDF Version

Features

Attaches to lower flange of metal beams or purlins
Supports 45° flanges up to 2” long, and 90° flanges up to 1-1/2” high
Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 23)

Specifications

Part Number	3150037PL
Material	Cast Iron
Finish	Plain
Rod Size (RS)	3/8"
Flange Thickness (FT)	1" Max
A	2"
B	1 1/2"
Screw Diameter (Sc)	3/8"
Torque (TQ)	5 ft lb
Pipe Size	4" Max
Static Load (F)	400 lb
Certifications	cULus FM
Standard Packaging Quantity	25 pc
UPC	78285639834

Setscrew must be tightened and torqued onto the sloped side of the I-beam.

Install in accordance with applicable code.

Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.

FM is a registered certification mark of FM Approvals LLC, LTD.

UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Warning

WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.