United StatesChange
nVent CADDY

320W Welded Beam Attachment

320W0062PL

Features

  • Hanger rod attachment to be welded to the bottom of a beam where large rod sizes and substantial loads exist
  • Based on the allowable stresses shown in ANSIĀ® Code for Pressure Piping
  • Conforms with Federal Specification WW-H-171 (Type 22), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 22)

Specifications

Part Number 320W0062PL
Material Steel
Finish Plain
Rod Size (RS) 5/8"
A 2"
C 1 5/8"
Screw Diameter (Sc) 5/8"
Screw Length (L) 2 3/4"
Static Load (F) 1,810 lb
Standard Packaging Quantity 25 pc
UPC 78285636361
Install when a rod attachment is desired, such as Model #40 Eye Rod or #35 Welded Eye Nut.
Install in accordance with applicable code.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.