United StatesChange
CADDY

355 Concrete Insert

3550000PL

Features

  • Structural attachment in all grades of concrete
  • Knockout keeps interior empty during pour
  • Allows for horizontal rod adjustment up to 1-1/4”
  • 355N Insert Nut required for UL Listing and FM Approval
  • Conforms with Federal Specification WW-H-171 (Type 19), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 18)

Specifications

Part Number 3550000PL
Material Steel
Finish Plain
Rod Size (RS) 3/8"
1/2"
5/8"
3/4"
7/8"
A 1 5/8"
B 3 9/16"
C 3"
Pipe Size 10" Max
Static Load (F) 1,200 lb
Certifications cULus
FM
Standard Packaging Quantity 150 pc
UPC 78285636428
Rod should be threaded through the nut until it tightens against the top of the insert.
For installation, place knockout side down on concrete form and nail in place. Wire 12” piece of #4 reinforcing rod on both sides. After concrete pour, knockout can be removed with a screwdriver.
cULus® Listed for 3/8" rod size up to 4" pipe and 1/2", 5/8" and 3/4" rod sizes up to 6" pipe.
FM® Approved for 3/8", 1/2", 5/8", and 3/4" rod sizes up to 8" pipe.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.