United StatesChange
CADDY

Thread Install Rod Hanger with Shot-Fire Bracket

4TIBSF

Features

  • Suspends threaded rod without the need for additional hardware
  • Complete with shot-fire bracket and pre-assembled drive pin from Powers Fasteners, Inc.
  • Quickly and easily attaches to concrete, steel or composite metal decking
  • Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
  • ICC-ES ESR-2024 evaluation report available for drive pin from Powers Fasteners, Inc

Specifications

Part Number 4TIBSF
Material Steel
Spring Steel
Finish Electrogalvanized
CADDY ARMOUR
Rod Size (RS) 1/4"
Height (H) 2.35"
Width (W) 2.31"
A 0.9"
Static Load (F) 100 lb
Standard Packaging Quantity 100 pc
UPC 78285686091
Uses Powers Fasteners, Inc. part number 50032.
Static load was established based on a 1” (25.4 mm) embedment depth and 3,000 psi (20.68 Mpa) lightweight concrete. For variations in embedment and material please consult www.powers.com. ​
For shot-fired supports in seismic design category D, E, or F, maximum load is the lesser of 90 lb (400 N) or the published load.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Applications