United StatesChange

BC26 Universal Beam Clamp with Tapped Hole



  • One thru-hole for easier installation of threaded rod
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19 and 23)


Part Number BC260025EG
Material Cast Iron
Finish Electrogalvanized
Rod Size (RS) 1/4"
Flange Thickness (FT) 13/16" Max
A 13/16"
Hole Size (HS) 1/4"
Hole Type Threaded
Screw Diameter (Sc) 1/4"
Torque (TQ) 4 ft lb
Static Load 1 (F1) 250 lb
Static Load 2 (F2) 100 lb
Certifications cULus
Standard Packaging Quantity 100 pc
UPC 78285634025
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.