United StatesChange
CADDY

CADDY CAT HP J-Hook with Pin Driven Angle Bracket

CAT21HPAFAB4

Features

  • Longer leg angle bracket for tool clearance
  • Designed to fit a variety of pin drivers
  • Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
  • Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
  • Rounded edges on J-Hooks provide proper bend radius support for high performance data cables
  • Cost effective alternative to expensive cable tray
  • Complies with EN 50174-2
  • Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569

Specifications

Part Number CAT21HPAFAB4
Material Steel
Finish Pregalvanized
Diameter (Ø) 1 5/16"
Area 2.29 in²
Cable Capacity, Cat 5e 50
Cable Capacity, Cat 6 40
Cable Capacity, Cat 6A 25
Hole Size (HS) 1/4"
Static Load (F) 60 lb
Certifications cULus
Standard Packaging Quantity 50 pc
UPC 78285685060
EAN-13 8711893143157
Non-continuous supports may not exceed spacing of 5' (1.5 m) per TIA 569-C.9.7 and EN 50174-2.
Cable capacity is calculated based on a 70% fill rate.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
ISO is a registered trademark of International Organization for Standardization.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Video