United StatesChange
CADDY

CADDY CAT HP J-Hook with BC200 Beam Clamp

CAT64HPBC200

Features

  • Easy installation to beam flanges
  • Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
  • Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
  • Rounded edges on J-Hooks provide proper bend radius support for high performance data cables
  • Cost effective alternative to expensive cable tray
  • Complies with EN 50174-2
  • Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569

Specifications

Part Number CAT64HPBC200
Material Steel
Finish Pregalvanized
Electrogalvanized
Diameter (Ø) 4"
Area 15.48 in²
Cable Capacity, Cat 5e 330
Cable Capacity, Cat 6 220
Cable Capacity, Cat 6A 140
Flange Thickness (FT) 1/2" Max
Static Load (F) 60 lb
Certifications cULus
Standard Packaging Quantity 25 pc
UPC 78285679358
EAN-13 8711893132861
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Non-continuous supports may not exceed spacing of 5' (1.5 m) per TIA 569-C.9.7 and EN 50174-2.
Cable capacity is calculated based on a 70% fill rate.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
ISO is a registered trademark of International Organization for Standardization.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Video