United StatesChange

nVent CADDY Rod Lock Strut



  • Allows for the quick creation, installation, and adjustment of multi-level trapeze assemblies
  • Ready to use out of the box and eliminates the need for cutting and preparing sections of strut
  • Easy "push-to-install" design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
  • Integrated adjustment nut enables fine tuning the system height up or down
  • Accommodates slight variances in rod-to-rod position of the trapeze
  • No loose parts or special tools needed for installation
  • Lock nut can be finger tightened, locking the rod in place
  • Works with all accessories that fit standard A or C type strut channels


Part Number CRLP250L18
Material Steel
Finish Electrogalvanized
Strut Type A (1 5/8" x 1 5/8")
Rod Size (RS) 1/2"
Length (L) 20"
Thickness (T) 12 GA
A 18"
B 7/8"
X 9/16" x 1 1/8"
Ultimate Static Load (F) 2,075 lb
Standard Packaging Quantity 5 pc
UPC 78285685257
Ultimate load ratings for nVent CADDY Rod Lock Strut assumes a uniformly distributed load and includes a hole factor of 0.92. It is based on the material yield and maximum allowable deflection; an additional Safety Factor of 2 is recommended.‚Äč
nVent CADDY Rod Lock Strut must be installed with the open side of the channel facing up.
For indoor applications only.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.