United StatesChange

CADDY ROD LOCK Strut End Bracket



  • Allows for the quick creation, installation, and adjustment of multi-level trapeze assemblies
  • Installs with the open side of strut channel facing down allowing for objects to be quickly positioned by sliding along the channel
  • Mounts to the end of any length of standard strut
  • Accommodates slight variances in rod-to-rod position of the trapeze and the length of the strut
  • Can be used to prefabricate assemblies which can be quickly pushed onto previously installed threaded rods
  • Easy "push-to-install" design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
  • Integrated adjustment nut enables fine tuning the system height up or down
  • Lock nut can be finger tightened, locking the rod in place
  • Works with slightly damaged threads and minor burrs on the threaded rod


Part Number CRLSEB37EG
Material Steel
Finish Electrogalvanized
Rod Size (RS) 3/8"
Ultimate Static Load 1 (F1) 1,000 lb
Ultimate Static Load 2 (F2) 460 lb
A 1.43"
B 1.9"
C 1.63"
Screw Diameter (Sc) M10
Wrench Size 1 15/16"
Wrench Size 2 11/16"
Standard Packaging Quantity 20 pc
UPC 78285684145
Ultimate Static Load 1 represents 12 GA strut channel type A. Ultimate Static Load 2 represents 14 GA strut channel type C.
Wrench Size 1 represents CADDY ROD LOCK hex nut size. Wrench Size 2 represents screw head size.
Static loads are based on one pair of CADDY ROD LOCK Strut End Brackets.
Static loads are assumed to be uniformly distributed.
Must be installed with the open side of the strut channel facing down.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.


Instruction Sheets