United StatesChange

CADDY CAT HP J-Hook with Shot-Fire Drop Bar



  • Complete with shot-fire bracket and pre-assembled drive pin from Powers Fasteners, Inc.
  • Quickly and easily attaches to concrete, steel or composite metal decking
  • Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
  • Specialized packaging simplifies material handling and minimizes sorting
  • Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
  • Rounded edges on J-Hooks provide proper bend radius support for high performance data cables
  • Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
  • Complies with EN 50174-2
  • Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569
  • ICC-ES ESR-2024 evaluation report available for drive pin from Powers Fasteners, Inc


Part Number DB12SFCAT32HP
Material Steel
Finish Electrogalvanized
Diameter (Ø) 2"
Area 3.97 in²
Cable Capacity, Cat 5e 90
Cable Capacity, Cat 6 60
Cable Capacity, Cat 6A 35
Height (H) 12"
A 7/8"
Static Load (F) 60 lb
Certifications cULus
Standard Packaging Quantity 20 pc
UPC 78285692472
Uses Powers Fasteners, Inc. part number 50032.
Static load was established based on a 1” (25.4 mm) embedment depth and 3,000 psi (20.68 MPa) lightweight concrete. For variations in embedment and material please consult www.powers.com.
Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ, Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60, P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P, TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40, DXA41,​ DXE72 / DX400; Würth Diva-1, BST-1, BST-2 or equivalent nailers.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
HILTI is a registered trademark of Hilti Aktiengesellschaft.
ISO is a registered trademark of International Organization for Standardization.
Ramset is a registered trademark of Illinois Tool Works, Inc.
Simpson is a registered trademark of Simpson Strong-Tie Company Inc.
SPIT is a registered trademark of Societe De Prospection & D’Inventions Techniques Spit.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.



CADDY Direct Fastening
1.41 MB English


cUL DWMU7.E165703
CAN/CSA C22.2 No. 18.4-04
UL DWMU.E165703
ANSI/UL 2239

Engineering Specifications


Bend Radius Overview
578 KB English