United StatesChange
LENTON

S13 Metric Parallel Bolt Coupler, Plain

EL22S13

Features

  • Provides continuity between reinforcing bar and ISO® 965 metric all-thread rod or bolts
  • May be used to anchor load-bearing equipment to foundations, columns or walls
  • Machined from non-weldable grades of material, but can be tack welded

Specifications

Part Number EL22S13
Material Steel
Finish Plain
100% U.S. Domestic Content Yes
Design Version Worldwide (Globally Available Materials)
Rebar Size, Metric 22 mm
Rebar Size, US #7
Diameter (Ø) 1.75"
Length (L) 4.1"
A 2.28"
Bar Depth (BD) 1.46"
Thread Size (TS) M27
Thread Depth (TD) 1.2"
Unit Weight 1.5 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
AS3600
BS EN 1992-1-1
BS EN 1992-2
CAN/CSA - N287.2/.3/.4
DIN EN 1992-1-1
Eurocode 2
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
ISO 15835
NEN EN 1992-1-1
NF A 35-020-1
NF EN 1992-1-1
ÖNORM EN 1992-1-1
Sellafield Ltd. Std. ES_0_3110
US Army Corps of Engineers
Certifications GOST POCC US CL87 H01475 (Russian Federation)
GOST POCC US CL87 H01512 (Russian Federation)
MOCT RU MCC 142 313 27792 (Russian Federation)
MOCT RU MCC 142 313 28697 (Russian Federation)
Standard Packaging Quantity 26 pc
UPC 78285658914
System Capacity (lbf)
Part Number Grade 4.8 Grade 5.8 Grade 8.8 Grade 10.9 Grade 12.9
EL22S13 41,311 51,639 82,623 101,132 101,132
EL25S13 50,410 63,013 100,820 126,013 126,013
EL28S13 62,367 77,959 124,734 139,644 139,644
EL32S13 87,743 109,679 175,486 176,215 176,215
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.
Coupler supplied without bolt.
Bolt may be replaced by threaded rod of same class/grade.
All calculations based on a minimum bolt engagement equal to Thread Depth (TD).
System Capacity based on bolt to coupler connection. For rebar to coupler connection, refer to applicable building codes and approvals or contact your LENTON representative.
Suffix "EE" has been added to some part numbers to clarify design version among regions.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ISO is a registered trademark of International Organization for Standardization.

Video