United StatesChange
LENTON

D14A Mechanical Anchor with Extension

EL28D14A130N

The LENTON D14A Mechanical Anchor with Extension provides a method of splicing and anchoring reinforcing bar in segmental concrete construction applications that have limited space or are severely congested. The large head significantly reduces required embedment lengths. The anchors are a combination of standard LENTON TERMINATOR D14 Mechanical Anchors and ELFM Female-to-Male Extensions.

Typically used in thin wall, wall/slab and beam/column applications, the D14A Mechanical Anchor with Extension easily attaches to the form panels using standard LENTON accessories. When the form is stripped, the protected threaded end of the coupler is exposed. Simply remove the protective cap or accessory and install the subsequent LENTON taper threaded dowel bar. This system eliminates hooked bar congestion, protruding dowels and the need to drill holes in expensive formwork.

Features

  • Reduces congestion
  • Utilizes standard LENTON accessories
  • Head area exceeds 10x bar area (net 9x)
  • Step machined in anchor to allow room for the installation tool on sizes 28 mm (#9) and larger
  • Components also sold separately
  • Available in customer specified lengths

Specifications

Part Number EL28D14A130N
Material Steel
Finish Plain
Rebar Size, Metric 28 mm
Rebar Size, US #9
Rebar Size, Canada 30M
Diameter 1 (Ø1) 1.57"
Diameter 2 (Ø2) 3.74"
Length 1 (L1) 5.12"
Length 2 (L2) 3.46"
Bar Depth (BD) 1.65"
Unit Weight 5.58 lb
Designed to Meet ACI 318
AS3600
ASTM A970
Standard Packaging Quantity 5 pc
UPC 78285693693
EAN-13 0782856936930
Anchorage calculations such as concrete breakout strength and development lengths are the responsibility of the design professional.
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.
Thread does not need to be flush with end of LENTON TERMINATOR. Thread may be +/- 2 threads from backside of coupler.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Applications

Video