United StatesChange
LENTON

P8 Position Coupler, Coated

EL28P8ES

Coated reinforcing bar is used in place of plain reinforcing bars to protect against corrosion. Typical applications include bridges, parking structures, pavement, marine structures and repair work. LENTON couplers and mechanical anchors are available in multiple coatings to meet specific job requirements.

Features

  • Designed to splice the same diameter bars
  • Designed to splice two curved, bent or straight bars, when neither bar can be rotated and where the ongoing bar is NOT free to move in its axial direction
  • Adjustability in the female end of the coupler allows the coupler to extend out to meet the taper-threaded reinforcing bar

Specifications

Part Number EL28P8ES
Material Steel
Finish Epoxy Coated
Finish Standard ASTM® A775/A775M and AASHTO M284
100% U.S. Domestic Content Yes
Rebar Size, Metric 28 mm
Rebar Size, US #9
Rebar Size, Canada 30M
Diameter (Ø) 2.5"
Length 1 (L1) 6.88"
Length 2 (L2) 9.26"
Bar Depth (BD) 1.49"
Bar Gap 1 (BG1) 3.9"
Bar Gap 2 (BG2) 6.28"
Coupler Body (CB) 5.29"
Unit Weight 8.5 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
AS3600
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
US Army Corps of Engineers
Standard Packaging Quantity 4 pc
UPC 78285666215
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ASTM is a registered trademark of American Society for Testing and Materials.

Applications

Video