United StatesChange

P8 Position Coupler with Form Saving Plate


Used in segmental pour and closure pour applications. Permanent form saving plates allow easy attachment to form work, eliminating costly damage to the forms.


  • Designed to splice the same diameter bars
  • Designed to splice two curved, bent or straight bars, when neither bar can be rotated and where the ongoing bar is NOT free to move in its axial direction
  • Adjustability in the female end of the coupler allows the coupler to extend out to meet the taper-threaded reinforcing bar


Part Number EL32S1P80572
Material Steel
Finish Plain
100% U.S. Domestic Content Yes
Rebar Size, Metric 32 mm
Rebar Size, US #10
Diameter 1 (Ø1) 2.5"
Diameter 2 (Ø2) 4.5"
Length 1 (L1) 7.31"
Length 2 (L2) 9.7"
Bar Depth (BD) 1.58"
Bar Gap 1 (BG1) 4.14"
Bar Gap 2 (BG2) 6.53"
Coupler Body (CB) 5.72"
Unit Weight 9.3 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
US Army Corps of Engineers
Standard Packaging Quantity 1 pc
UPC 78285669777
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.