United StatesChange
LENTON

S5 Imperial UN Parallel Bolt Coupler for Nuclear Applications

EL32S5AQ

The nuclear industry demands scrutiny throughout the entire product life-cycle. LENTON products produced under the ERICO ASME Quality System Certificate and the ISO® 9001 : 2008 Quality Management System receive the utmost attention to detail. These quality systems are designed to include compliance to NCA-3800 and NQA-1. LENTON products produced for nuclear applications are assigned unique part numbers to ensure detailed product documentation, including full product traceability, is performed to individual customer requirements.

Features

  • Provides continuity between reinforcing bar and imperial UN all-thread rod or bolts
  • May be used to anchor load-bearing equipment to foundations, columns or walls
  • Machined from non-weldable grades of material, but can be tack welded

Specifications

Part Number EL32S5AQ
Material Steel
Finish Plain
100% U.S. Domestic Content Yes
Rebar Size, Metric 32 mm
Rebar Size, US #10
Diameter (Ø) 2"
Length (L) 4.55"
A 2.63"
Bar Depth (BD) 1.58"
Thread Size (TS) 1 3/8 UN
Thread Depth (TD) 1.88"
Unit Weight 2.5 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
AS3600
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
US Army Corps of Engineers
Standard Packaging Quantity 12 pc
UPC 78285670681
System Capacity
Part Number Grade 2 Grade 5 Grade 8
EL32S5AQ 89,511 lbs 179,021 lbs 206,473 lbs
EL32S5BQ 59,982 lbs 119,965 lbs 143,220 lbs
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.
Coupler supplied without bolt.
Bolt may be replaced by threaded rod of same class/grade.
All calculations based on a minimum bolt engagement equal to Thread Depth (TD).
System Capacity based on bolt to coupler connection. For rebar to coupler connection, refer to applicable building codes and approvals or contact your LENTON representative.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ISO is a registered trademark of International Organization for Standardization.

Video

Brochures

Instruction Sheets

Technical