United StatesChange

P8 Position Coupler with Two Form Saving Plates


Used in segmental pour applications. The addition of two form saving plates allow the female end of the coupler to be used in keyway applications where the coupler is attached to formwork at both ends. Permanent form saving plates allow easy attachment to the forms, eliminating costly damage to the forms.


  • Designed to splice the same diameter bars
  • Designed to splice two curved, bent or straight bars, when one bar can be rotated and where the ongoing bar is NOT free to move in its axial direction
  • Adjustability in the female end of the coupler allows the coupler to extend out to meet the taper-threaded reinforcing bar


Part Number EL36S3P82400
Material Steel
Finish Plain
100% U.S. Domestic Content Yes
Rebar Size, Metric 36 mm
Rebar Size, US #11
Rebar Size, Canada 35M
Diameter 1 (Ø1) 2.5"
Diameter 2 (Ø2) 4.5"
Length 1 (L1) 25.59"
Length 2 (L2) 28.16"
Bar Depth (BD) 1.68"
Bar Gap 1 (BG1) 22.23"
Bar Gap 2 (BG2) 24.8"
Coupler Body (CB) 24"
Unit Weight 34.8 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
US Army Corps of Engineers
Standard Packaging Quantity 1 pc
UPC 78285670050
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.