United StatesChange

S4 Imperial UNC Parallel Bolt Coupler, Plain

EL36S4B

Details
Applications
Video
Documents
3D ModelsNew

PDF Version

Features

Provides continuity between reinforcing bar and imperial UNC all-thread rod or bolts
May be used to anchor load-bearing equipment to foundations, columns or walls
Machined from non-weldable grades of material, but can be tack welded

Specifications

Part Number	EL36S4B
Material	Steel
Finish	Plain
100% U.S. Domestic Content	Yes
Rebar Size, Metric	36 mm
Rebar Size, US	#11
Rebar Size, Canada	35M
Diameter (Ø)	2 1/4"
Length (L)	4 3/4"
A	2.63"
Bar Depth (BD)	1.68"
Thread Size (TS)	1 1/2 UNC
Thread Depth (TD)	1.88"
Unit Weight	3.4 lb
Designed to Meet	AASHTO ABNT NBR 8548:1984 ACI 318 Type 1 (125% Specified Yield) ACI 318 Type 2 (Specified Ultimate) ACI 349 ACI 359 AS3600 CAN/CSA - N287.2/.3/.4 IBC Type 1 (125% Specified Yield) IBC Type 2 (Specified Ultimate) US Army Corps of Engineers
Standard Packaging Quantity	12 pc
UPC	78285665316

Bolt-to-Coupler Capacity
Part Number	Grade 2	Grade 5	Grade 8
EL10S4	8,514 lbs	17,028 lbs	21,285 lbs
EL12S4	13,560 lbs	27,120 lbs	33,900 lbs
EL16S4	20,068 lbs	40,135 lbs	48,663 lbs
EL20S4	27,704 lbs	55,408 lbs	69,260 lbs
EL22S4	36,345 lbs	72,689 lbs	90,862 lbs
EL25S4	45,797 lbs	91,593 lbs	114,491 lbs
EL28S4	58,147 lbs	116,293 lbs	143,220 lbs
EL32S4	84,315 lbs	168,630 lbs	206,473 lbs
EL36S4	113,968 lbs	227,935 lbs	232,146 lbs
EL36S4A	58,147 lbs	116,293 lbs	145,367 lbs
EL36S4B	84,315 lbs	168,630 lbs	206,473 lbs
EL43TS4	149,894 lbs	299,787 lbs	371,623 lbs
EL57TS4	239,930 lbs	479,859 lbs	599,824 lbs

Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.

Coupler supplied without bolt.

Bolt may be replaced by threaded rod of same class/grade.

All calculations based on a minimum bolt engagement equal to Thread Depth (TD).

System Capacity based on bolt to coupler connection. For rebar to coupler connection, refer to applicable building codes and approvals or contact your LENTON representative.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Warning

WARNING
Pentair products shall be installed and used only as indicated in Pentair's product instruction sheets and training materials. Instruction sheets are available at www.erico.pentair.com and from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.