United StatesChange
LENTON

LENTON LOCK S-Series Shear Bolt Coupler, Plain

LL20S1

Features

  • Requires no bar end preparation such as sawing or swaging
  • Installs quickly and easily using simple hand tools
  • Bolt heads shear off when appropriate bolt torque is achieved
  • Designed to work as a one-step transition/reducer
  • The rebar centering pin is removable which allows the coupler to fully pass onto the reinforcing bar for applications such as closure pours

Specifications

Part Number LL20S1
Material Steel
Finish Plain
Rebar Size, Metric 18 mm
20 mm
Rebar Size, US #6
Rebar Size, Canada 20M
Diameter 1 (Ø1) 1 3/4"
Diameter 2 (Ø2) 0.94"
Length (L) 6"
Socket Width (SW) 1/2"
Number of Bolts 6
Torque (TQ) 150 ft lb
Unit Weight 2.9 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
US Army Corps of Engineers
ACI 318 Type 2-A706 Grade 60 Only (Specified Ultimate)
IBC Type 2-A706 Grade 60 Only (Specified Ultimate)
Certifications IAPMO®-UES ER-0129 (United States)
Los Angeles RR 24507 (United States)
Standard Packaging Quantity 14 pc
UPC 78285664177
EAN-13 8711893105353
Bolt length may vary after the bolt heads are sheared off. Bolt heads are not required to be removed as long as the appropriate bolt torque is achieved.
When using an impact wrench, size the wrench for 2x the bolt torque. If using an air impact wrench, check the air pressure, torque rating and air flow requirements before starting installations.
Refer to complete installation instructions provided with the product or available at erico.pentair.com prior to commencing installation.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

IAPMO is a registered trademark of International Association of Plumbing and Mechanical Officials.

Applications

Video