United StatesChange
LENTON

LENTON LOCK B-Series Shear Bolt Coupler, Coated

LL28B1ES

Coated reinforcing bar is used in place of plain reinforcing bars to protect against corrosion. Typical applications include bridges, parking structures, pavement, marine structures and repair work. LENTON couplers and mechanical anchors are available in multiple coatings to meet specific job requirements.

Features

  • Requires no bar end preparation such as sawing or swaging
  • Installs quickly and easily using simple hand tools
  • Bolt heads shear off when appropriate bolt torque is achieved
  • Designed to work as a one-step transition/reducer
  • The rebar centering pin is removable which allows the coupler to fully pass onto the reinforcing bar for applications such as closure pours
  • Multiple coatings available

Specifications

Part Number LL28B1ES
Material Steel
Finish Epoxy Coated
Finish Standard ASTM® A775/A775M and AASHTO M284
Rebar Size, Metric 28 mm
30 mm
Rebar Size, US #9
Rebar Size, Canada 30M
Diameter 1 (Ø1) 2.38"
Diameter 2 (Ø2) 1.34"
Length (L) 11.3"
Socket Width (SW) 5/8"
Number of Bolts 10
Number of Round Bolts 2
Torque (TQ) 350 ft lb
Unit Weight 10.1 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
AS3600
BS EN 1992-1-1
BS EN 1992-2
CAN/CSA - N287.2/.3/.4
DIN EN 1992-1-1
Eurocode 2
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
ISO 15835
NEN EN 1992-1-1
NF A 35-020-1
NF EN 1992-1-1
ÖNORM EN 1992-1-1
Sellafield Ltd. Std. ES_0_3110
US Army Corps of Engineers
Standard Packaging Quantity 4 pc
UPC 78285662146
Bolt length may vary after the bolt heads are sheared off. Bolt heads are not required to be removed as long as the appropriate bolt torque is achieved.
When using an impact wrench, size the wrench for 2x the bolt torque. If using an air impact wrench, check the air pressure, torque rating and air flow requirements before starting installations.
Refer to complete installation instructions provided with the product or available at erico.pentair.com prior to commencing installation.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ASTM is a registered trademark of American Society for Testing and Materials.

Applications

Video