United StatesChange
LENTON

LENTON LOCK S-Series Shear Bolt Coupler, Coated

LL32S1MG

Coated reinforcing bar is used in place of plain reinforcing bars to protect against corrosion. Typical applications include bridges, parking structures, pavement, marine structures and repair work. LENTON couplers and mechanical anchors are available in multiple coatings to meet specific job requirements.

Features

  • Requires no bar end preparation such as sawing or swaging
  • Installs quickly and easily using simple hand tools
  • Bolt heads shear off when appropriate bolt torque is achieved
  • Designed to work as a one-step transition/reducer
  • The rebar centering pin is removable which allows the coupler to fully pass onto the reinforcing bar for applications such as closure pours
  • Multiple coatings available

Specifications

Part Number LL32S1MG
Material Steel
Finish Mechanical Galvanized
Finish Standard ASTM® B695 Class 50 with Clear Trivalent Chromate Seal
Rebar Size, Metric 32 mm
Rebar Size, US #10
Diameter 1 (Ø1) 2 1/2"
Diameter 2 (Ø2) 1 1/2"
Length (L) 8.7"
Socket Width (SW) 13/16"
Number of Bolts 6
Torque (TQ) 550 ft lb
Unit Weight 9 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
US Army Corps of Engineers
ACI 318 Type 2-A706 Grade 60 Only (Specified Ultimate)
IBC Type 2-A706 Grade 60 Only (Specified Ultimate)
Standard Packaging Quantity 4 pc
UPC 78285669449
Bolt length may vary after the bolt heads are sheared off. Bolt heads are not required to be removed as long as the appropriate bolt torque is achieved.
When using an impact wrench, size the wrench for 2x the bolt torque. If using an air impact wrench, check the air pressure, torque rating and air flow requirements before starting installations.
Refer to complete installation instructions provided with the product or available at erico.pentair.com prior to commencing installation.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ASTM is a registered trademark of American Society for Testing and Materials.

Applications

Video

Instruction Sheets