Air Terminal, Offset, Imperial Thread
Details
Application images
Resources
Features
- Offset air terminal to provide separation from equipment
Specifications
PRODUCT ATTRIBUTES
LP-C-20-8-B-ST-XX-OS-C-N | ||
LP | Standard Prefix | |
C | Material Code |
A: Aluminum, C: Copper, S: Stainless Steel 304 (EN 1.4301)
|
20 | Diameter |
20: 3/8", 22: 1/2", 24: 5/8"
|
8 | Length |
1: 10", 2: 12", 3: 15", 4: 18", 5: 24", 6: 30", 7: 36", 8: 48"
9: For all non-standard lengths and lengths greater than 48" |
B* | Finish Code |
B: Bare, L: Tinned
|
ST* | Tip Type |
ST: Safety Tip
|
XX* | Overall Terminal Length |
Used for non-standard lengths and lengths from 49" to 99". Must be order in whole inch increments.
|
OS | Offset Terminal | |
C | Bend Angle |
A: 15°, B: 30°, C: 45°, D: 60°, E: 75°, F: 90°
|
N | Bend Length |
M: 4", N: 6", P: 8", Q: 10", R: 12", S: 14"
|
* Empty if none
Brochure
Certifications
UL OVTZ.E202878
English
ANSI/UL 96
UL OVTZ.E202878
ANSI/UL 96
- Warning
- nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.