United StatesChange
ERICO

Cable to Steel, Rail

PB10HS3S

ERICO CADWELD applications for railway properties utilize the ERICO CADWELD PLUS F80 and the ERICO CADWELD F80 welding material alloys. ERICO CADWELD exothermically welded connections are engineered to provide a permanent, molecular bond that will not loosen or corrode, enabling connection of dissimilar materials. The connections are designed to perform for the life of the conductor and/or installation. The ERICO CADWELD connection has a current carrying capacity equal to or greater than that of the conductor and will withstand repeated fault currents without failing during operation. Once completed, installers can clearly ensure quality by visually inspecting the new connection.

Features

  • Forms a permanent, low resistance connection
  • Provides a molecular bond
  • ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor
  • Portable installation equipment with no external source of power required
  • Installers can be easily trained to make ERICO CADWELD Exothermic Connections
  • Connections can be visually inspected

Specifications

Part Number PB10HS3S
Mold Family HS
Connects To Steel Pipe or Flat Surface
Conductor Size 500 kcmil Ropelay
Conductor Outer Diameter, Nominal 1.04"
Pipe Size 24" Min
Outer Diameter 24" Min
Split Crucible No
Wear Plates No
Mold Only No
Welding Material PB200 or PB200PLUSF80, Sold Separately
Handle Clamp L160, Sold Separately
Conductor Sleeve S429F3S20, Sold Separately
Price Key C
Ease of Use Preferred
Standard Packaging Quantity 1 pc
UPC 78285615337
For applications such as computer room, tunnel or other low-ventilation areas, specify a smokeless ERICO CADWELD EXOLON mold. Add an XL prefix to the standard mold part number when ordering (for example, a PB10GR162G becomes XLPB10GR162G). Similarly, ERICO CADWELD EXOLON welding material is also designated by the XL prefix (for example, PB90 becomes XLPB90).
A test weld should be made to check for the possibility of burn through on thin sections and to determine detrimental metallurgical effects.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.