United StatesChange

T-Series Horizontal Transition Sleeve, Top Fill


The top fill horizontal T-Series sleeve has vent holes to reduce air entrapment and help ensure proper filling of the sleeve.


  • Designed to connect horizontal reinforcing bars and angular reinforcing bars up to 45 degrees
  • Used to splice different diameter bars
  • Works with saw cut, flame cut and sheared bars
  • Can be visually inspected after installation
  • Available with extended sleeve lengths


Part Number RBT1114101HA
Material Steel
Finish Plain
100% U.S. Domestic Content Yes
Sleeve Standard Length
Rebar Size, Metric 43 mm
36 mm
Rebar Size, US #14
Rebar Size, Canada 45M
Diameter 1 (Ø1) 2.75"
Diameter 2 (Ø2) 2.06"
Length 1 (L1) 6"
Length 2 (L2) 3"
Length 3 (L3) 1.03"
Unit Weight 4.8 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
US Army Corps of Engineers
Standard Packaging Quantity 9 pc
UPC 78285665080
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the LENTON CADWELD Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.