United StatesChange

T-Series Vertical Low Slip Sleeve


The low slip vertical T-Series sleeve's increased sleeve length reduces slip (for extreme code requirements) and improves splice performance when the rib pattern or spacing does not meet the minimum product specifications.


  • Designed to connect vertical reinforcing bars and angular reinforcing bars greater than 45 degrees
  • Used to splice the same diameter bars
  • Additional length improves performance
  • Works with saw cut, flame cut and sheared bars
  • Can be visually inspected after installation


Part Number RBW6557A
Material Steel
Finish Plain
100% U.S. Domestic Content Yes
Rebar Size, Metric 22 mm
Rebar Size, US #7
Diameter 1 (Ø1) 1.62"
Diameter 2 (Ø2) 1.13"
Length 1 (L1) 7"
Length 2 (L2) 3.5"
Unit Weight 2.1 lb
Designed to Meet AASHTO
ABNT NBR 8548:1984
ACI 318 Type 1 (125% Specified Yield)
ACI 318 Type 2 (Specified Ultimate)
ACI 349
ACI 359
CAN/CSA - N287.2/.3/.4
IBC Type 1 (125% Specified Yield)
IBC Type 2 (Specified Ultimate)
US Army Corps of Engineers
Standard Packaging Quantity 30 pc
UPC 78285641969
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the LENTON CADWELD Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.