United StatesChange

SBC Stamped Beam Clamp, Top Mount



  • Allows structural attachment to metal beams, bar joist, channel, or angle iron in top mount position only unless used on a parallel flange
  • Lightweight, one-piece stamped body provides superior strength and eliminates deficiencies associated with castings
  • Spins onto threaded rod and allows for easy adjustment
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 19)


Part Number SBC037
Material Steel
Finish Pregalvanized
Rod Size (RS) 3/8"
Flange Thickness (FT) 3/4" Max
A 0.925"
B 0.85"
C 1.58"
Screw Diameter (Sc) 3/8"
Torque (TQ) 5 ft lb
Static Load (F) 500 lb
Certifications cULus
Standard Packaging Quantity 50 pc
UPC 78285679878
Set screw must be tightened and torqued onto the sloped side of the I-beam, channel, or angle iron flange.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.